Slot Number Is Invalid Bdo

Symptom: A switch running Cisco IOS may see these errors repeatedly, often at regular intervals:%CAPI-SW2-2-INVALIDSLOTNUM: Invalid slot number 0, Expected value is between 1 and 96 Conditions: This is only see on catalyst 6000 series switches. The errors will start after removal of a port channel interface ('no int Port-channel1' for example). Database ID 11, page (1:10932), slot 0, link number 1028 is invalid. Run DBCC CHECKTABLE. I have run DBCC CHECKTABLE on the 5 tables involved in the script and none come back reporting any issues.

  1. Slot Number Is Invalid Bdo Account
  2. Slot Number Is Invalid Bdo Visa
  3. Slot Number Is Invalid Bdo Address

In a previous post, we discussed that you can use your Banco De Oro (BDO) Online Banking feature to pay your bills. Good news because The Philippine Long Distance Telephone Company (PLDT) is in partnership with BDO for your payments. Moreover, you can both do it in the browser version and in the app.

Escape the hassle of going into traffic just for you to pay your bill. With BDO Online Banking, you can rest easy and pay your bills without you stepping foot outside the comfort of your own home. Save time, money, and effort by just paying your bills.

Slot Number Is Invalid Bdo Account

Of course, first and foremost, you need to have a BDO account and an online banking account. Don’t know how to register? Click here.

So let’s get to the point; how do you pay your PLDT bills through BDO Online Banking?

Step 1:

Log-in to your BDO Online banking account. **It will send you an One-Time Password (OTP) via SMS. If your mobile phone isn’t available, you can proceed in answering the Security Questions.

Once you’re logged-in, you will see this on the left-hand side of your browser:

Before we get to the payment, you first need to enroll your PLDT Account to your BDO Account. This is so that every payment, you can just select that specific account that you’re opt to use.

You see that highlighted part? The Enrollmentbutton? That’s what you want to click next.

Step 2:

Clicking that option would pop-up sets of options. It’s quite a lot but in this case, hit on the Company/Biller option. After that, select Enroll.

Slot number is invalid bdo visa

Step 3:

This page is where you have to fill the application/enrollment form out. Since we’re talking about PLDT, Select PLDT from the dropdown menu in the Company/Biller field. Complete the form.

  • Company/Biller Name – PLDT
  • Subscriber Number – PLDT Account Number
  • Subscriber Name – PLDT Account Name
  • Preferred Nickname – Any nickname that you wish

**NOTE: If you want to have the option to pay through an Automated Teller Machine (ATM), tick the Automated Teller Machine option as well.

You will get a confirmation that the enrollment was successful.

Slot Number Is Invalid Bdo

Step 4:

From the left-hand side of the screen again, select Pay Bills and Reload. It will then open another set of options and in these options, select Pay Bills.

In the app, follow the same instructions: Enroll your PLDT Account -> Confirm -> Pay your bills.

**It may take up to three (3) business days before the payment gets posted. Contact the PLDT Customer Service if three days have passed and the payment still is not reflecting.

NOTE: Failure to enroll your PLDT Account Prior to payment might lead you to not see the PLDT option without ticking the “Pay a Company/Biller that is not yet enrolled.” This might cause delays and we don’t want that to happen so, better to enroll your PLDT account firsthand.

Imagine the benefit of having online banking by your side. You can never go wrong and it’s not just bills payment you can do with this BDO online banking scheme, it’s just one of the few wonderful things that can help you save time, money, and effort.

Read Also:

Slot Number Is Invalid Bdo Visa


2013-09-16 00:07:21 UTC

Slot Number Is Invalid Bdo Address

I have an LSI 9211-8i controller which is running the IR firmware. My
intention is to flash it with the IT firmware and use it for an md
RAID array.
However I don't think it is playing nicely with my motherboard BIOS.
On first installing it, with no drives attached, the LSI BIOS runs and
then the motherboard BIOS goes through an AHCI drive detection phase.
After detecting the drives (2xHD 1xOptical, connected to SATA ports on
MB) the boot hung and required a hard reset.
The LSI MPT2BIOS version is and the controller firmware is
The motherboard is a Gigabyte GA-MA78G-DS3H (revision 1) running the F3 BIOS.
I can enter the LSI configuration utility during the controller boot
process and I see that it has a PCI slot of 'ff' which, according to
the utility, indicates an invalid PCI slot.
I've updated to the latest motherboard BIOS (F9) and now the boot
process follows the same sequence but continues after the AHCI
detection and eventually brings up linux. However the controller
still reports a PCI slot of 'ff'.
I can see it in linux but if I have a drive connected I don't see it
in the boot configuration utility (not sure if I should) and I don't
see it as a /dev/sd? device (not sure if this is where I should find
it). So I suspect it's not really working.
Here is the output from lspci -v:
02:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic
SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
Subsystem: LSI Logic / Symbios Logic Device 3020
Flags: bus master, fast devsel, latency 0, IRQ 18
I/O ports at de00 [size=256]
Memory at fdcfc000 (64-bit, non-prefetchable) [size=16K]
Memory at fdc80000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at fdb00000 [disabled] [size=512K]
Capabilities: [50] Power Management version 3
Capabilities: [68] Express Endpoint, MSI 00
Capabilities: [d0] Vital Product Data
Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [c0] MSI-X: Enable+ Count=15 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [138] Power Budgeting <?>
Capabilities: [150] Single Root I/O Virtualization (SR-IOV)
Capabilities: [190] Alternative Routing-ID Interpretation (ARI)
Kernel driver in use: mpt2sas
Kernel modules: mpt2sas
Anybody run into this or have any advice? Is this really a problem?
I'm reluctant to risk bricking it during a firmware flash if it truly
is misbehaving.
To unsubscribe from this list: send the line 'unsubscribe linux-raid' in
the body of a message to ***
More majordomo info at